Enclave FWD V6-3.6L (2008)
1. Install the following suspension components to the rear suspension crossmember:
*
Lower control arm-Refer to Lower Control Arm Replacement.
*
Adjustment link-Refer to Adjustment Link Replacement.
*
Upper control arm-Refer to Upper Control Arm Replacement.
*
Stabilizer shaft insulator brackets-Refer to Stabilizer Shaft Insulator Replacement.
2. Install the right park brake cable to the rear suspension crossmember.
Notice: Refer to Fastener Notice.
3. Install the right park brake cable retaining bolts to the rear suspension crossmember.
Tighten the bolts to 10 N.m (89 lb in).
