Enclave FWD V6-3.6L (2008)
12. Remove the lower mount using a flat chisel. Begin extracting the mount by guiding the wedge of the chisel tip between the mount flange lip and
the suspension crossmember.
13. Continue extracting the mount until it is fully removed from the suspension crossmember.
Installation Procedure
1. Clean the frame mount opening.
2. Apply a thin coat of rubber lubricant GM P/N 1051717 (Canadian P/N 5728223), or equivalent to the inside of the suspension crossmember mount
opening.
3. Apply a thin coat of rubber lubricant GM P/N 1051717 (Canadian P/N 5728223), or equivalent to the suspension crossmember mount.