Enclave FWD V6-3.6L (2008)
Rear Knuckle Alignment Link: Service and Repair
Adjustment Link Replacement
Removal Procedure
Important: The following procedure indicates servicing the left side of the vehicle. Servicing the right side of the vehicle is similar.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the rear shock absorber. Refer to Shock Absorber Replacement (See: Suspension Strut / Shock Absorber/Service and Repair/Rear
Suspension Shock Absorber/Shock Absorber Replacement) .
3. Remove the retaining nut from the adjuster link to the knuckle.
4. Install a wrench to hold the adjuster cam bolt.