Enclave FWD V6-3.6L (2008)
6. Remove the retainer (1) from the transmission range selector lever cable.
7. Press the locking tabs inward in order to release the transmission range selector lever cable (2) from the cable bracket (3).
8. Remove the transmission range selector lever cable grommet (6) from the cowl panel.
9. Remove the transmission range selector lever cable from the vehicle.
Installation Procedure
1. Install the transmission range selector lever cable to the vehicle.
2. Install the transmission range selector lever cable grommet (6) to the cowl panel.
3. Install the transmission range selector lever cable (2) to the cable bracket (3).
4. Install the retainer (1) to the transmission range selector lever cable.
5. Connect the transmission range selector lever cable terminal (4) to the transmission manual shift lever pin (5).
6. Install the transmission range selector lever cable to the transmission control lever base. Insure the cable retainer (2) is fully secured to the
transmission control lever base.
7. Connect the transmission range selector lever cable terminal (1) to the shift lever pin.
8. Install the floor console left extension panel. Refer to Front Floor Console Extension Panel Replacement - Left Side (Acadia) Front Floor Console
