Enclave FWD V6-3.6L (2008)
Notice: Refer to Fastener Notice .
3. Install the control knob screw (1).
Tighten the screw to 4 N.m (35 lb in).
4. Lift the shift control knob trim ring (2) up to the shift control knob until a click sound is heard indicating the trim ring is secured to the shift knob.
5. Place the shift control lever in the PARK position.
6. Rotate the key to the off position.
7. Connect the transmission tap up/tap down switch electrical connector (1).
8. Check for proper operation of the shift control through all gear ranges.
9. Install the floor console left extension panel. Refer to Front Floor Console Extension Panel Replacement - Left Side (Acadia) Front Floor Console
Extension Panel Replacement - Left Side (Enclave) Front Floor Console Extension Panel Replacement - Left Side (Outlook) .
10. Release the parking brake.
