Enclave FWD V6-3.6L (2008)
Valve Body: Service and Repair
Control Valve Body Cover Replacement
Control Valve Body Cover Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
3. Remove the oil cooler inlet hose (1) from the retainer on the control valve body cover.
4. Remove the oil cooler outlet hose retainer nut (5) from the control valve body cover.
5. Remove the oil cooler outlet hose (4) from the retainer on the control valve body cover.
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
7. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement .
8. Drain the transmission. Refer to Transmission Fluid Replacement (See: Service and Repair/Removal and Replacement) .