Enclave FWD V6-3.6L (2008)
11. Connect the large two-wire connector (1) to the body harness (2).
12. Connect the small five-wire connector (1) to the body harness (2).
13. Secure the large two-wire connector and small five-wire connector to the windshield washer solvent heater assembly bracket.
14. Connect the two windshield wiper solvent inlet and outlet hoses together. Use a portion of the rubber wiper solvent hose removed in Step 1 if
needed to join the two plastic wiper solvent hoses together. Discard the remaining portions of the rubber windshield wiper solvent hoses.
15. Route and secure windshield wiper solvent hose along passenger side front fender.
