LaCrosse V6-3.6L (2007)
This service kit contains: Second Clutch Housing Fluid Seal Rings (613), a Second Clutch Assembly (617), a Case Cover (Channel Plate) Upper Gasket
(430), and a Case Cover (Channel Plate) Lower Gasket (429). In addition to the content of this service kit, other gaskets not included in this service kit
will also be needed to complete the repair - a Case Cover Lower Gasket (429), and a Case Cover Upper Gasket (430). These gaskets can be obtained by
ordering gasket kit 24206391.
Be sure to use ONLY the Second Clutch Assembly and Second Clutch Housing Fluid Seal Rings provided in this service kit. DISCARD the Second
Clutch Assembly and Second Clutch Housing Fluid Seal Rings removed from the transmission being serviced.
Disassemble ONLY the Oil Pump Assembly from the Case Cover (Complete). DO NOT disassemble the Control Valve Body from the Case Cover.
Remove ONLY the Case Cover-to-Case bolts to remove the Case Cover and Valve Body from Transmission Case AS AN ASSEMBLY. To access all
Case Cover-to-Case bolts, it is necessary to remove the Pressure Control Solenoid Valve Assembly (322), and 1-2 & 3-4 Shift Solenoid Valve
Assemblies (315A, 315B).
