LaCrosse V6-3.6L (2007)
Notice: refer to Fastener Notice.
2. Install the outside handle bolts (1 2) to the door.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the outside handle bolt access tape to the inner door panel.
4. Install the lock cylinder rod to the outside door handle.
5. Install the outside handle rod into the clip
6. Close the clip cover over the outside handle rod.
7. Inspect the outside handle for proper operation.
8. Remove the masking tape.
9. Install the front door water deflector.
10. Install the front door trim panel.
