LaCrosse V6-3.6L (2007)
20. Remove the bolts which secure the rear frame to the body.
21. Raise the vehicle in order to separate the frame from the body.
22. If you are replacing the frame, remove the following components:
*
Both of the lower control arms. Refer to Lower Control Arm Replacement in Front Suspension.
*
The stabilizer shaft. Refer to Stabilizer Shaft Replacement in Front Suspension.
*
The spacers, the upper insulator, the lower insulator, and the retainers. Refer to Frame Cushion or Insulator Replacement - Front or to Frame
Cushion or Insulator Replacement - Rear .
Installation Procedure
1. If you are replacing the frame, install the following components:
*
Both of the lower control arms-Refer to Lower Control Arm Replacement in Front Suspension.
*
The stabilizer shaft-Refer to Stabilizer Shaft Replacement in Front Suspension.
*
The spacers, the upper insulator, the lower insulator, and the retainers-Refer to Frame Cushion or Insulator Replacement - Front or to Frame
Cushion or Insulator Replacement - Rear .
2. Position the engine support table with the frame under the vehicle.
3. Lower the vehicle to the frame.