LaCrosse V6-3.6L (2007)
Seat Back: Service and Repair
Seat Back Replacement - Rear (Folding)
Seat Back Replacement - Rear (Folding)
Removal Procedure
1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
2. Remove the rear center seat belts. Refer to Seat Belt Replacement - Center Rear in Seat Belts.
3. Remove the nut (1) from the child rear seat latch bracket.
4. Remove the bolts (2) from each end of the latch bracket.
5. Fold the rear seat back cushions down.
6. Remove the bolts from the rear seat latches.
7. Remove the rear seat latches from the rear seat back.
8. Fold the rear seat back cushions up.
9. Reposition the shoulder belts from the rear seat back.
10. Remove the rear seat back from the vehicle.
Installation Procedure
1. Position the rear seat back to the vehicle.
2. Reposition the seat belts to the rear seat back.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Apply a thread sealant, GM P/N USA 12345382 Canada 10953489, Loctite 242, Permatex 24200 to the threads of the bolts (2) and also the stud
for the latch bracket nut .
4. Install the child seat latch bracket nut (1).
Install the child seat latch bracket bolts (2) to each end of the latch bracket.