LaCrosse V6-3.6L (2007)
1. Install Electronic Brake Control Module if replacing the BPMV only.
2. Install BPMV (2) and EBCM as an assembly into the BPMV bracket. Align the flats of the studs on the BPMV with the BPMV bracket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 BPMV to BPMV bracket nuts (1).
Tighten the 2 BPMV to BPMV bracket nuts to 12 N.m (8 lb ft).