LaCrosse V6-3.6L (2007)
1. Install the BPMV bracket (4) to the wheel house.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 3 BPMV bracket nuts (1, 2, 3) to the studs on the BPMV bracket (4).
Tighten the 3 BPMV bracket nuts to 10 N.m (7 lb ft).
3. Install the BPMV and EBCM as an assembly to the BPMV bracket.
4. Turn the ignition switch to the RUN position.
5. Perform the Diagnostic Trouble Code (DTC) List - Vehicle. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Descriptions
