LaCrosse V6-3.6L (2007)
11. Remove the caliper pin bolts (1). Note the location of the caliper pin bolts. The leading caliper pin, or top bolt, has a bushing as part of the
assembly. The trailing caliper pin, or bottom bolt, is a solid design.
12. Remove the caliper (2) from the rotor and the caliper bracket (3).
13. Inspect the caliper bolt boots in the caliper bracket for damage. Replace any damaged caliper bolt boots.
14. Inspect the caliper bolts (1) for corrosion or damage. If corrosion or damage is found, use new caliper pin bolts (1) when installing the caliper.
Installation Procedure
1. If reusing the brake caliper pin bolts, wipe away any debris and old lubricant with a with a clean shop cloth.
2. Apply lubricant, GM P/N 18047666, or equivalent, to the brake caliper pin bolts. Apply a thin layer to the pin bushing (2) and to the caliper pin
bolt shank (3, 4). Ensure that there is not a buildup of excess lubricant at the end of the leading caliper pin (1), in front of the bushing.
3. Install the caliper (2) over the rotor and onto the caliper bracket (3).