LaCrosse V6-3.6L (2007)
Brake Caliper: Removal and Replacement
Rear Brake Caliper Replacement
Rear Brake Caliper Replacement
Caution: Refer to Brake Dust Caution.
Caution: Refer to Brake Fluid Irritant Caution.
Caution: Refer to Park Brake Cable to Caliper Caution.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
Removal Procedure
1. Inspect the fluid level in the brake master cylinder reservoir.
2. If the brake fluid level is midway between the maximum-full point and the minimum allowable level, no brake fluid needs to be removed from the
reservoir before proceeding.
3. If the brake fluid level is higher than midway between the maximum-full point and the minimum allowable level, remove brake fluid to the
midway point before proceeding.
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Remove the tire and wheel assembly.
6. Release tension from park brake system at the equalizer.
7. Disconnect the front and rear cables from one another at the connector clip (2).
8. Disconnect the park brake cable from the park brake lever on the brake caliper.
9. Remove the park brake cable from the caliper bracket.
