LaCrosse V6-3.6L (2007)
Important: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
6. Tighten the camshaft position actuator. See: Service and Repair/Overhaul/Repair Instructions/110. Camshaft Position Actuator Installation - Right
Side Exhaust
7. Install the right intake and exhaust camshaft position actuator solenoids. See: Actuators and Solenoids - Engine/Variable Valve Timing
Solenoid/Service and Repair
8. Install the right intake and exhaust camshaft position sensors. See: Powertrain Management/Computers and Control Systems/Camshaft Position
Sensor/Service and Repair
9. Install the right camshaft cover. See: Cylinder Head Assembly/Valve Cover/Service and Repair
10. Install the lower intake manifold. See: Intake Manifold/Service and Repair
