LaCrosse V6-3.6L (2007)
9. Loosen the left engine strut bracket-to-cylinder head bolts.
10. Remove the camshaft cover bolts and camshaft cover.
11. Remove and discard the camshaft cover seal and grommets. DO NOT reuse.
Installation Procedure
1. Install a NEW camshaft cover seal and NEW grommets.
2. Install the camshaft cover.
Notice: Refer to Fastener Notice in Service Precautions.
3. Tighten the left engine strut bracket-to-cylinder head bolts.
Tighten the left engine strut bracket-to-cylinder head bolts to 50 N.m (37 lb ft).
