LaCrosse V6-3.6L (2007)
7. Install the A/C compressor hose to the condenser.
Important: Use a 20mm wrench or pliers to hold the A/C condenser block fitting, this will prevent the A/C line from twisting while
torquing the A/C line nut.
8. Install the A/C compressor hose nut to the condenser.
Tighten the nut to 17 N.m (12.5 lb ft).
9. Install the air cleaner assembly.
10. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
11. Leak test the fittings of the component using J 39400-A.