buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Glove Box Lamp Switch > < Turn Signal/Multifunction Switch|Page 18305
Page 1
background image

Door Switch: Service and Repair

Front Side Door Switch Harness Replacement

Removal Procedure

1. Remove the front door trim panel. Refer to  Front Side Door Trim Panel Replacement .
2. Remove the following switch electrical connectors: 

*

The power rearview mirror switch (1)

*

The power door switch (2)

*

The power window switch (3)

*

The rear compartment lid switch (4)

3. Remove the harness from the trim panel.

Installation Procedure

1. Position the harness to the trim panel.
2. Press the harness connectors into the following switches:

*

The power rearview mirror switch (1)

*

The power door switch (2)

*

The power window switch (3)

*

The rear compartment lid switch (4)

3. Install the front door trim panel. Refer to  Front Side Door Trim Panel Replacement .

Glove Box Lamp Switch > < Turn Signal/Multifunction Switch|Page 18305