LaCrosse V6-3.6L (2007)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Inlet Duct Replacement
Removal Procedure
1. Loosen the intake air duct clamps.
2. Disconnect the positive crankcase ventilation (PCV) tube from the air intake duct.
3. Remove the air intake duct from the throttle body and the mass air flow (MAF) sensor.
4. Remove the air intake duct.
Installation Procedure
1. Install the air intake duct to the MAF sensor.
2. Install the air cleaner intake duct to the throttle body.
3. Connect the PCV tube to the air intake duct.
Notice: Refer to Fastener Notice in Service Precautions.
4. Tighten the air intake air duct clamps.
Tighten the clamps to 2 N.m (18 lb in).
