LaCrosse V6-3.6L (2007)
8. Connect the heated oxygen sensor connector (2) to the rear of the throttle body heater inlet hose/pipe (3).
9. Install the wiper motor module.
10. Install the remote power steering fluid reservoir mounting bolts (1, 3).
*
Tighten the remote power steering fluid reservoir to intake plenum mounting bolts to 9 N.m (80 lb in).
*
Tighten the remote power steering fluid reservoir to cylinder head mounting bolt to 25 N.m (18 lb ft).
11. Connect the following to the remote power steering fluid reservoir (1):
*
The brake booster hose
*
The wiring harness (2)
12. Fill the cooling system.
