LaCrosse V6-3.6L (2007)
11. Install the RH engine mount lower nuts.
12. Install the LH transmission mount lower nuts.
13. Install the RH engine splash shield.
14. Install the tire and wheel assembly.
15. Remove the drain pan from under the vehicle.
16. Lower the vehicle.
17. Remove the engine support fixture.
18. Remove the power steering reservoir bracket and engine support fixture hook.
19. Attach the power steering reservoir to bracket screws.
Tighten the power steering reservoir screws to 6 N.m (53 lb in).
20. Install the power steering reservoir bracket to cylinder head. Tighten the power steering reservoir bracket bolts to:
*
M6 bolt - 9 N.m (80 lb in)
*
M8 bolt - 25 N.m (18 lb ft)
21. Install the coolant recovery reservoir.
22. Install the engine mount struts and brackets.
23. Install the fuel injector sight shield.
24. Fill the power steering system with power steering fluid. Refer to Checking and Adding Power Steering Fluid.
25. Bleed the power steering system.
26. Inspect the power steering system for leaks.
