LaCrosse V6-3.6L (2007)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Position Sensor Replacement
Removal Procedure
1. Turn the ignition OFF.
2. Remove the closeout/insulator panel from under the dashboard on the drivers side.
Notice: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic
throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control
components in cleaning solvents of any type.
3. Disconnect the accelerator pedal position (APP) sensor electrical connector from the accelerator pedal module.
4. Remove the APP sensor mounting bolts.
5. Remove the APP sensor from the vehicle.
Installation Procedure
1. Position the APP sensor to the mounting plate.
Notice: Refer to Fastener Notice.
2. Install the APP sensor mounting bolts.
Tighten the APP sensor mounting bolts to 10 N.m (89 lb in).
3. Connect the APP sensor electrical connector.
