LaCrosse V6-3.6L (2007)
Variable Induction Control Solenoid: Service and Repair
Intake Manifold Runner Control Solenoid Replacement
Removal Procedure
Important: DO NOT separate the upper intake manifold from the lower intake manifold.
1. Remove the upper intake manifold with the lower intake manifold.
2. Remove the intake manifold runner control solenoid bolts.
3. Remove the intake manifold runner control solenoid.
Installation Procedure
1. Install the intake manifold runner control solenoid.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the intake manifold runner control solenoid bolts.
Tighten the intake manifold runner control solenoid bolts to 10 N.m (89 lb in).
3. Install the upper intake manifold.