LaCrosse V6-3.6L (2007)
Knock Sensor: Diagnostic Aids
Delphi Connectors (Micro .64)
Delphi Connectors (Micro.64)
Tools Required
J-38125 Terminal Repair Kit
Important: When probing female 0.64 terminals, it is important to use the correct adapter. There have been some revisions to the test adapter
for 0.64 terminals. The proper adapter for 0.64 terminals is the J 35616-64B which has a tin terminal and a blue wire between the base and tip.
Failure to use the proper test adapter may result in damage to the terminal being tested and improper diagnosis.
Removal Procedure
Follow the steps below in order to remove terminals from Micro 64 connectors.
1. Locate the lever lock on the wire dress cover. While depressing the lock, pull the lever over and past the lock. The lever lock may be located on
the top or sides of the wire dress cover.
View of a typical Micro 64 connector.
