buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Engine Controls - MIL ON/Multiple DTC's Set|Page 10927 > < Engine Controls - MIL ON/Multiple DTC's Set|Page 10925
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine - MIL ON/DTCs P0008/P0009/P0016/P0017/P0018/P0019

TECHNICAL

Bulletin No.: 07-06-01-013B

Date: June 18, 2008

Subject: 
LP1, LY7 MIL/DTCs P0008, P0009, P0016, P0017, P0018 or P0019 (Replace Primary Drive and Both Secondary Drive Timing Chains)

Models:
2007 Buick LaCrosse/Allure
2007 Cadillac CTS, SRX, STS

with 2.8L HFV6 or 3.6L HFV6 Engine (VINs T, 7 - RPOs LP1, LY7)

Attention:

The bulletin does not apply for 2008 model year 2.8L HFV6 or 3.6L HFV6 Engines.

Supercede:

This bulletin is being revised to include additional information on model years for the third design roller-type chain, add an Attention statement that this
bulletin does not apply to the 2008 model year and update the Parts Information. Please discard Corporate Bulletin Number 07-06-01-013A (Section 06 -
Engine/Propulsion System).

Condition

Some customers may comment on the Malfunction Indicator Lamp (MIL) being illuminated. Technicians may find the Diagnostic Trouble Codes
(DTCs) shown above stored.

Cause

This condition may be caused by stretched primary drive and both secondary drive timing chains. Correction Refer to SI for the follow diagnostic
information if only one of the DTCs shown above are set.

If there are more than one of the above mention DTCs set, inspect for stretched timing chains. Refer to Camshaft Timing Drive Components Cleaning
and Inspection (Fourth Design) in SI.

The above illustration shows the third design roller type chain (1) (for model years 2005-2006 and early built 2007 - LY7) and the fourth design link
type chain (2) (for model year 2007 - LY7).

Engine Controls - MIL ON/Multiple DTC's Set|Page 10927 > < Engine Controls - MIL ON/Multiple DTC's Set|Page 10925