LaCrosse V6-3.6L (2007)
10. Mount the module (1) in the SIR deployment fixture (3) with the open end facing up using the following mounting method.
*
Adjust and secure the arms (4) of J 39401-B to the deployment fixture (3).
*
To mount, use the proper size bolt (2) and nut (5) with washers in order to secure the pretensioner (1) to the deployment fixture brackets (4).
*
Securely tighten all fasteners prior to deployment.
11. Inspect the J 38826 SIR Deployment Harness and the appropriate pigtail adapter for damage. Replace as needed.
12. Short the 2 SIR deployment harness (1) leads together using one banana plug seated into the other.
13. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
14. Extend the SIR deployment harness and adapter to full length from the deployment fixture.
15. Connect the pretensioner (1) to the adapter (2) on the deployment harness (3).
Important: The rapid gas expansion involved with deploying a pretensioner is very loud. Notify all the people in the immediate area that
you intend to deploy the seat belt pretensioner.
