LaCrosse V6-3.6L (2007)
7. Remove the nut from the seat belt pretensioner.
8. Remove the wiring harness from the seat belt pretensioner through the seat bottom frame.
9. Remove the pretensioner from the seat.
Installation Procedure
1. Position the pretensioner to the seat bottom frame.
2. Position the wiring harness to the seat belt pretensioner through the seat bottom frame.
3. Connect the pretensioner electrical connector to the seat electrical harness.
4. If equipped, connect the seat belt reminder cable.
Notice: Refer to Fastener Notice.
5. Install the nut to the seat belt pretensioner.
Tighten the nut to 35 N.m (26 lb ft).
