LaCrosse V6-3.6L (2007)
Air Flow Meter/Sensor: Service and Repair
Mass Airflow Sensor/Intake Air Temperature Sensor Replacement
Removal Procedure
1. Turn the ignition OFF.
2. Remove the mass air flow (MAF) electrical connector.
3. Remove the air cleaner intake duct.
4. Remove the MAF sensor fasteners.
5. Remove the MAF sensor and the MAF sensor seal.
Installation Procedure
1. Install the new MAF sensor seal and the MAF sensor.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the MAF sensor screws.
Tighten the MAF sensor screws to 4 N.m (35 lb in).
3. Install the air cleaner intake duct.
4. Install the MAF electrical connector.
