LaCrosse V6-3.6L (2007)
Negative: Service and Repair
Battery Negative Cable Replacement (LY7)
Removal Procedure
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same as the original cable.
1. Disconnect the battery negative cable.
2. Remove the bolt (1) securing the battery negative cable to the side rail.
3. Disconnect the body harness connector (3) from the battery negative cable.
4. Remove the bolt securing the battery negative cable to the engine block.
5. Lower the vehicle.
6. Remove the battery negative cable from the engine.
Installation Procedure