LaCrosse V6-3.6L (2007)
5. Install the power steering pressure hose to the power steering gear.
Tighten the pressure hose fitting to 27 N.m (20 lb ft).
6. Attach the power steering cooler pipe clips to cradle.
7. Install the steering gear heat shield (snap type) over the steering gear and pipes.
8. Install the tire and wheel assembly.
9. Remove the drain pan from under the vehicle.
10. Lower the vehicle.
11. Fill the power steering system with power steering fluid. Refer to Checking and Adding Power Steering Fluid.
12. Bleed the power steering system.
13. Inspect the power steering system for leaks.
