LaCrosse V6-3.6L (2007)
2. Install the power steering pressure hose to vehicle.
3. Install the pressure hose at steering gear and hand tighten.
4. Install the power steering pressure hose clips to cradle and ensure proper hose routing.
5. Install the power steering pressure hose into quick connector at power steering pump.
6. Tighten the power steering pressure hose to power steering gear.
Tighten the pressure hose fittings to 27 N.m (20 lb ft).
7. Install the heat shield on the steering gear covering hoses.
8. Install the RH engine mount to engine.
9. Lower the vehicle enough to access the engine support tool.
10. Lower the powertrain into position while aligning the RH and LH powertrain mount studs into cradle.
