LaCrosse V6-3.6L (2007)
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the oil pump body and cover bolts (206,207).
*
Tighten the bolts (207) to 12 N.m (106 lb in).
*
Tighten the bolts (206) to 16 N.m (12 lb ft).
6. Reposition and connect the electrical connectors to the following:
*
Automatic transaxle fluid pressure manual valve position switch assembly (395)
*
2-3 Shift solenoid valve assembly (315B)
*
If equipped internal mode switch
7. Install the case side cover.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool
will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned.
8. Reset the TAP values. Refer to Transmission Adaptive Functions.