LaCrosse V6-3.6L (2007)
21. Install the top case side cover bolt.
Tighten bolts to 25 N.m (18 lb ft).
22. Install the transaxle shift cable bracket and shift cable bracket bolts.
Tighten the bolts to 30 N.m (22 lb ft).
23. Install the transaxle shift cable to the transaxle range selector.
24. Connect the transaxle wiring harness connector.
25. Install the engine mount struts.
26. Install the air intake duct and connect the MAF sensor wiring harness.
27. Install the EVAP hose to EVAP valve.
28. Install the engine dress cover.
Notice: Refer to Do Not Overfill the Transmission Notice in Service Precautions.
29. Check and fill the transaxle as necessary.
30. Inspect for fluid leaks.
