LaCrosse V6-3.6L (2007)
Pressure Regulating Solenoid: Service and Repair
Pressure Control Solenoid Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect the pressure control solenoid (PCS) electrical connector.
3. Remove the PCS retaining clip (314E).
4. Remove the PCS (322).
Installation Procedure
1. Install the PCS (322).
2. Install the PCS retaining clip (314E).
3. Connect the PCS electrical connector.
4. Install the case side cover.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
5. Reset the TAP values. Refer to Transmission Adaptive Functions.
