LaCrosse V6-3.6L (2007)
16. Connect each cable section to the following before connecting the two cable sections.
*
Insert the metal end fitting of the shift control cable into the transaxle cable end.
*
Use the molded end fittings to push the metal end fitting of the shift control cable and the transaxle cable end together until the metal post
snaps into place.
17. Depress the adjuster clip once. This mobilizes the adjuster housing toward the transaxle end fitting.
18. Line up the end fittings so they slide together until you feel the parts come together and lock.
19. Depress the adjuster clip completely. This locks the cable into its adjusted service position.
20. Pull the conduit in the opposite direction to assure full system adjustment of the shift cable.
