LaCrosse V6-3.6L (2007)
Front Door Window Motor: Service and Repair
Front Side Door Window Regulator Motor Replacement
Removal Procedure
Caution: Disconnect the power window switch when working inside the driver door. When operated, the Express Up/Down Feature
allows the door window to move very quickly, without stopping, which could cause personal injury.
1. Remove the front door trim panel.
2. Remove the front door water deflector.
3. Remove the front door window regulator.
4. Remove the window regulator and motor through the access opening in the inner panel.
5. Remove the power window motor bolts from the window regulator.
Installation Procedure
1. Install the window regulator and motor through the access opening in the inner panel.
Notice: refer to Fastener Notice.
2. Install the power window motor bolts to the window regulator.
Tighten the bolts to 6 N.m (53 lb in).
3. Install the window regulator and motor through the access opening.
4. Install the front door window regulator.
5. Inspect the window for proper operation.
6. Install the front door water deflector.
7. Install the front door trim panel.
