LaCrosse V6-3.6L VIN 7 (2006)
4. Caution: Make sure brake pipes are correctly connected to brake pressure modulator valve. If brake pipes are switched by mistake, wheel lockup
will occur and personal injury may result. The only two ways this condition can be detected are by using a Scan Tool or by doing an Antilock stop.
Important: If a new BPMV is being installed, remove the shipping plugs from the valve openings in the compartment during the next step.
Important: Use the locations noted during removal.
Install the master cylinder brake pipes (1) on the BPMV (2).
