LaCrosse V6-3.6L VIN 7 (2006)
Brake Rotor/Disc: Specifications
Disc Brake Component Specifications
Front Brake Rotors
^
Rotor Discard Thickness * ........................................................................................................................................................... 30.7 mm (1.21 inch)
^
Rotor Maximum Allowable Lateral Runout .............................................................................................................................. 0.06 mm (0.002 inch)
^
Rotor Maximum Scoring ........................................................................................................................................................... 1.50 mm (0.059 inch)
^
Rotor Maximum Allowable Thickness Variation .................................................................................................................... 0.025 mm (0.001 inch)
^
Rotor Minimum Allowable Thickness After Refinishing ............................................................................................................ 31.0 mm (1.22 inch)
^
Rotor Thickness-NEW ................................................................................................................................................................. 32.2 mm (1.27 inch)
Rear Brake Rotors
^
Rotor Discard Thickness * ........................................................................................................................................................... 12.5 mm (0.49 inch)
^
Rotor Maximum Allowable Lateral Runout .............................................................................................................................. 0.05 mm (0.002 inch)
^
Rotor Maximum Scoring ........................................................................................................................................................... 1.50 mm (0.059 inch)
^
Rotor Maximum Allowable Thickness Variation ...................................................................................................................... 0.02 mm (0.001 inch)
^
Rotor Minimum Thickness After Refinishing .............................................................................................................................. 12.9 mm (0.51 inch)
^
Rotor Thickness-NEW ................................................................................................................................................................. 14.0 mm (0.55 inch)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace
any rotor that does not meet the minimum thickness specification.