LaCrosse V6-3.6L VIN 7 (2006)
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the brake fluid pressure sensor (2) to the EBCM (1).
^
Tighten the brake fluid pressure sensor to 20 Nm (15 ft. lbs.).
2. Connect the brake fluid pressure sensor electrical connector (3) to the brake fluid pressure sensor (2).
3. Fill and bleed the hydraulic brake system. Refer to Master Cylinder Reservoir Filling and Hydraulic Brake System Bleeding (Manual) Hydraulic
Brake System Bleeding (Pressure) in Hydraulic Brakes.
4. Perform the Auto Bleed Procedure. Refer to ABS Automated Bleed Procedure .
5. Perform the ABS Diagnostic System Check. Refer to Diagnostic Trouble Code (DTC) List - Vehicle . See: Powertrain Management/Computers
and Control Systems/Testing and Inspection/Diagnostic Trouble Code Descriptions
