LaCrosse V6-3.6L VIN 7 (2006)
Important:
‹› Ensure that the marks on the camshaft position actuators and the timing chain (15-18) are aligned.
‹› DO NOT tighten the camshaft position actuator bolt at this time.
2. Assemble the camshaft actuator to the camshaft.
3. Loosely install the camshaft actuator bolt.
4. Remove the EN 46108.
Notice: A wrench must be used on the hex of the camshaft when loosening or tightening in order to prevent component damage. Failure to prevent
the torque reaction against the timing drive chain can lead to timing drive chain failure.
