LaCrosse V6-3.6L VIN 7 (2006)
9. Important: Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
Mark the timing chain and the respective locations on camshaft position actuators (15-18).
10. Remove the camshaft position actuator bolt.
11. Remove the camshaft bearing caps and the camshaft.
Installation Procedure
1. Important:
^
Ensure that the marks on the camshaft position actuators and the timing chain (15-18) are aligned.
^
DO NOT tighten the camshaft position actuator bolt at this time.
Locate the camshafts to the cylinder head and assemble the camshaft actuators to the camshafts.
2. Install the camshafts and the camshaft bearing caps.
3. Remove the EN 46108.
4. Install the crankshaft balancer.
