LaCrosse V6-3.6L VIN 7 (2006)
16. Install the J 28467-1A cross bracket assembly.
17. Assemble the following to create 2 lift hook assemblies as shown:
^
J 28467-34
^
J 28467-6A
^
J 28467-7A
18. Install the 2 lift hook assemblies (1) to the J 45057-2 (2).
19. Install the LH engine mount strut nuts and bolts to the strut brackets.
20. Install the RH engine lift hook through the power steering reservoir bracket.
21. Gently tighten the J 28467-34 lift hook wing nuts to support powertrain.
Removal Procedure
1. Remove the complete engine support fixture assembly.
2. Remove the power steering reservoir bracket.
3. Attach the power steering reservoir to bracket and install the screws.
^
Tighten the power steering reservoir screws to bracket to 6 Nm (53 inch lbs.).
4. Install the power steering reservoir and bracket assembly.
^
Tighten the power steering reservoir bracket bolts: M6 bolt to 9 Nm (7 ft. lbs.) and M8 bolt to M8 Bolt to 25 Nm (18 ft. lbs.)
5. Install the engine mount struts.
