LaCrosse V6-3.6L VIN 7 (2006)
7. Remove the oil pressure sensor.
8. Install the J 21867 with the J-21867-6 adapter.
9. Measure the engine oil pressure.
10. Compare the readings to the Engine Mechanical Specifications .
11. If the engine oil pressure is below specifications, inspect the engine for one or more of the following:
^
Loose oil filter adapter bolts
^
Missing or damaged oil filter adapter O-ring seal or seals
^
Worn or dirty oil pump
^
Loose oil pump-to-engine block bolts
^
Loose, plugged or damaged oil pump screen
^
Missing or damaged oil pump screen O-ring seal
^
Damage or leak in the oil pump screen suction tube
^
Malfunctioning oil pump pressure regulator valve
^
Missing or incorrectly installed oil gallery plugs
^
Loose camshaft intermediate drive shaft bolts
^
Excessive bearing clearance for the following:
^
Connecting rod or rods
^
Crankshaft
^
Camshaft or camshafts
^
Camshaft intermediate drive shaft sprocket
^
Cracked, porous or restricted oil galleries
^
Broken valve lifters
12. Repair or replace components as necessary.