LaCrosse V6-3.6L VIN 7 (2006)
4. Install the water pump pulley and the water pump pulley bolts.
5. Use the EN 46104 (1) in order to retain the water pump pulley.
6. Install the water pump pulley bolts.
^
Tighten the water pump pulley bolts to 12 Nm (106 inch lbs.).
7. Install the generator drive belt.
8. Fill the cooling system. Refer to Draining and Filling Cooling System (L26 Static Fill) Draining and Filling Cooling System (LY7 Static Fill)
Draining and Filling Cooling System (L26, LY7, GE 47716 Fill).
