LaCrosse V6-3.6L VIN 7 (2006)
8. Install the bolts to the HVAC module assembly upper support bracket.
Tighten the bolts to 4 N.m (36 lb in).
9. Install the bolts to the HVAC module assembly lower support bracket (1).
Tighten the bolts to 4 N.m (36 lb in).
10. Install the bolt to the HVAC module assembly right support bracket (2).
Tighten the bolt to 4 N.m (36 lb in).
11. Position the I/P wiring harness to the original position.
12. Connect any disconnected ground wires.
13. Install the brake pedal brace bolts to the I/P carrier.
14. Position the brake pedal to the brake pedal brace.
15. Install the brake pedal bolt and nut.
16. Seat the bottom junction block tabs and snap the top of the junction block to the passenger knee bolster.
17. Install the junction block bolt.
Tighten the bolts to 10 N.m (89 lb in).
18. Install the I/P trim pad.