buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Buick LaCrosse V6-3.6L VIN 7 (2006)|Hoses > < Engine - Engine Noise Or Damage After Oil Filter Replace|Page 4251
Page 1
background image

Refrigerant Filter: Service and Repair

AIR CONDITIONING (A/C) REFRIGERANT FILTER REPLACEMENT

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner assembly. 
3. Remove the A/C line coupling from the evaporator tube to condenser tube. 

4. Disconnect the evaporator tube from the condenser.
5. Remove and discard the O-ring seals. 
6. Remove the refrigerant filter from the evaporator tube.

INSTALLATION PROCEDURE

1. Replace the O-ring seals on the evaporator tube. 

2. Install a new refrigerant filter to the evaporator tube.
3. Connect the evaporator tube to the condenser.
4. Install the A/C line coupling to the evaporator tube and condenser tube. 
5. Install the air cleaner assembly. 
6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
7. Leak test the fittings of the component using J 39400-A.

Buick LaCrosse V6-3.6L VIN 7 (2006)|Hoses > < Engine - Engine Noise Or Damage After Oil Filter Replace|Page 4251