LaCrosse V6-3.6L VIN 7 (2006)
Fuse Block: Service and Repair
Instrument Panel Electrical Center or Junction Block Replacement
INSTRUMENT PANEL ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the outer trim cover.
3. Disconnect the body wiring harness from the accessory wiring junction block. Pull the harness away from the block for access.
4. Remove the instrument panel (I/P) compartment.
5. Remove the junction block bolt.
6. Disengage the junction block tabs from the passenger knee bolster. Pull the junction block away from the I/P.
7. Remove the junction block.
INSTALLATION PROCEDURE