LaCrosse V6-3.6L VIN 7 (2006)
Knock Sensor: Service and Repair
Knock Sensor (KS) Replacement - Bank 2
KNOCK SENSOR (KS) REPLACEMENT - BANK 2
REMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the wiring harness heat shield from the oil level indicator tube to gain access.
4. Remove the knock sensor (KS) electrical connector.
5. Remove the KS bolt.
6. Remove the KS.
INSTALLATION PROCEDURE