LaCrosse V6-3.6L VIN 7 (2006)
Catalyst Shield: Service and Repair
Catalytic Converter Heat Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Notice: Refer to Catalytic Converter Movement Notice in Service Precautions.
Support the exhaust system.
3. Remove the catalytic converter.
4. Remove the oxygen sensor wiring harness (3) from the catalytic converter heat shield.
5. Remove the catalytic converter heat shield rivets.
6. Remove the catalytic converter heat shield.
Installation Procedure
1. Install the catalytic converter heat shield.
2. Install the converter heat shield rivets.
